OVERLAY MIX This product is used for interior/exterior, driveways, patios, decks, and floors. This high density, extra fine mix is created for long lasting protection from erosion and high traffic.
Check for loose scaly areas such as dirt, loose paint, dust, loose concrete, etc. All loose particles must be removed. Use a good degreaser to remove grease. Mildew (or algae) can usually be removed by using bleach and a wire brush in a small area. Larger areas should be cleaned first with bleach, and then washed with a pressure sprayer.
For each bag of Overlay Mix, add approx 3,5 - 4 Lt of clean water.
Overlay Mix is produced in 2 different versions; Overlay Mix G and Overlay Mix W. Overlay Mix W is designed for applications where high comperessive strength and water repellent is required or design wise lighter colors is specified as part of the project..
Property Overlay Mix G & Overlay Mix W Criteria
SIST EN 13813
Compressive strength (N/mm2)
23,90 > CT 20 (OMG)
47,50 > CT 40 (OMW)
Bending strength (N/mm2)
F > 6
By CERAM Building Technology UK -- CBT Reference BT07614TAS / BT07638TAS
Find the TDS and MSDS for Overlay Mix from the links below: